News Center

Before installing the spring chuck, the clamping spring must be installed into the lock nut, and then the lock nut installed with the clamping spring must be gently screwed on the connecting rod or the tool handle. After installing the tool, the clamping nut can be put into work with a difficult hand. In order to obtain the performance, before installing the spring chuck, please clean the clamping spring, the threaded part of the lock nut, the positioning surface and the conical surface. During the installation of the clamping spring locking nut, the clamping spring locking nut must be tilted at a certain angle, and then gently placed in the locking clamp of the locking nut.

Installation method of 1. CNC tool holder spring chuck

Before installing the spring chuck, the clamping spring must be installed into the lock nut, and then the lock nut installed with the clamping spring must be gently screwed on the connecting rod or the tool handle. After installing the tool, the clamping nut can be put into work with a difficult hand.

In order to obtain the performance, before installing the spring chuck, please clean the clamping spring, the threaded part of the lock nut, the positioning surface and the conical surface.

During the installation of the clamping spring locking nut, the clamping spring locking nut must be tilted at a certain angle, and then gently placed in the locking clamp of the locking nut.

2. CNC tool holder spring chuck matters needing attention

When clamping the tool with the spring chuck handle for cutting, we must pay attention to the clamping spring must clamp the tool, so as to avoid the tool flying out and hurting people during high-speed rotation and causing accidents.

When the spring chuck handle is not working, it is strictly forbidden to tighten the clamping nut on the handle or connecting rod when installing the tool, so as to prevent the clamping spring from deforming and brittle fracture.